Jindal Steel Dealers

Jindal Stainless Steel Sheet Suppliers, Jindal Hr Coils Stock, Jindal Steel Plate Price List, Jindal stainless steel hot rolled plate, Jindal stainless steel hot rolled coil, Jindal stainless steel cold rolled coils

Jindal Steel Distributor, Jindal Sheet Dealers & Jindal Plate Dealer, Jindal Steel Plate Weight Chart, Jindal Coated Sheet, Jindal SS 304 Plate, Jindal Steel Chequered Plate Price List

ARE YOU LOOKING Trusted Dealers of Jindal Steel ? SILVER STEELS is a leading Distributors & Dealers of  Jindal Stainless Steel Sheet, Jindal Stainless Steel Plate and Cr/Hr Coil Authorized Dealers & Distributor in Pune, Mumbai, Bangalore, Delhi, Goa, Jaipur, Tamilnadu, Lucknow, Faridabad, Ahmedabad, Gujarat, Hyderabad, Karnataka, Kolkata, Chandigarh, Bihar, Andhra Pradesh, Nashik. Also Dealers of Jindal Steel, Posco, JFE Steel, Arcelormittal, Columbus Stainless, Acerinox Stainless Steel, NAS, Aperam, Outokumpu Sheet Plate in stock and Ready to Ship.

ISO 9001:2000, ISO 14001:2004 , OSHAS 18001, CE, ADW-2000 and certification by IBR for boiler grade steel, besides being a well known steelmaker.

Jindal Steel Sheets 304, 304L, 316, 316L, JT, J4 Grade in 2B FINISH, NO4 FINISH, N4 FINISH, HR COIL, CR COIL - Jindal Stainless Limited is one of the largest producers of Stainless steel in India

PRICE LIST

Jindal Stainless Steel 316l Sheet at Rs 260 Per Kg
Jindal Stainless Steel Coil - Rs 260 Per Kg
Jindal Stainless Steel 304 Sheet at Rs 210 /kilogram

Jindal Steel Sheet Grades

• 304 Stainless Steel Sheet
• 316 Stainless Steel Sheet
• 321 Stainless Steel Sheet
• 409/409L/409M SS
• 410/410S Stainless Steel Sheet
• 430 Stainless Steel Sheet
• 439 Stainless Steel Sheet
• 441 Stainless Steel Sheet

JINDAL DISCRETE PLATES:

• Width 1500 mm - 4900 mm
• Width 1500 mm - 2500 mm
• Thickness 5 mm - 150 mm
• Thickness 5mm – 25 mm
• Maximum length : 24 metre
• Maximum coil weight : 25 MT
• Maximum plate weight : 30 Tons

JINDAL HOT ROLLED COILS:

• Width 1500 mm to 2500 mm
• Thickness 5mm – 25 mm
• Maximum coil weight : 25 MT

JINDAL CUT TO LENGTH PLATES:

• JINDAL PLATE Width 1500 mm - 2500 mm
• Thickness 8 mm – 25 mm
• Length 6000 mm – 12500 mm

Jindal plate Grade and Specification

JINDAL STEEL - Structrual Steel BS4360 : 1986 Gr 43 A/ B/ C ASTM – A – 36 DIN 17 100 : 1980 Gr St 37-2 EN 10 025 : 1993 Gr S 275 JR/ JO & other equivalent grades

JINDAL STEEL - High Tensile Steel DIN 17 100 : 1980 Gr St 44-2/ 44-3/ 52-3 EN 10025 : 1993 Gr S 355 JR/ JO BS 4360 : 1986 Gr 50 A/ B/ C/ D ASTM – A – 572 Gr 50/ 60 & other equivalent grades

Thickness	8 to 150 mm
Width	1220 mm	For 8 mm to 150 mm thickness
	1250 mm	For 8 mm to 25 mm thickness
	1500 mm	For 8 mm to 32 mm thickness
Length	2440 mm to 10000 mm	Upto 10 mm thickness
	2440 mm to 13000 mm	Upto 150 mm thickness
Edge Conditioning	Mill Edge

Tolerances

Width	1220 mm	+/-30 mm
	1250 mm	+30 mm/ -0 mm or +/- 30 mm
	1500 mm	+30 mm/ -0 mm or +/-30 mm
Length	Upto 6000 mm	+/-30 mm or +60/ -0 mm
	6000 mm to 13000 mm	+/-50 mm or +100/ -0 mm
Thickness	As per standard

JINDAL STEEL Structural Steel

IS 2062	:	1999 Gr A/ B/ C (including Copper Bearing Quality) IS 10748 Gr I, II & III
BS 4360	:	1990 Gr 43 A/ B/ C ASTM – A – 36
DIN 17 100	:	1980 Gr St 37-2/ RSt 37-2, St 44-2, St 44-3
EN 10 025	:	1993 Gr S 275 JR/ JO and other equivalent grades

JINDAL STEEL High Tensile Steel Plates

IS 8500	:	1991 Gr Fe 490/ 490 B, Fe 540/ 540 B (including Copper Bearing Quality) Equv SAILMA 350/ 350 Hi/ 410/ 410 Hi IS 961 Gr Fe 540 W-HT
DIN 17 100	:	1980 Gr St 52-3
DIN 17 102	:	1983 STE 255, STE 285, STE 315, STE 355, STE 380, STE 420 (Including Micro-alloyed High Tensile Grades)
EN 10025	:	1993 Gr S355 JR/ JO/ J2G3/ J2G4/ K2G3 & K2G4
BS 4360	:	1990 Gr 50 A/ B/ C/ D/ E ASTM – A – 572 Gr 50/ 60 and other equivalent grades

Medium Carbon

C – 45, C – 35, C – 30, SAE – 1030, En – 8 and other equivalent grades

Wear Resistanr Quality

Equv SAIL HARD, Equv TISCRAL, JISCO HARD
THICKNESS	:	8 – 140 mm
WIDTH	:	1200/ 1250/ 1500 mm
LENGTH	:	2500 – 13000 mm

Types of Jindal Plate Sheet & Coils in Stock

Jindal Coils Sheet Dealers	Jindal Colour Sheet Dealers	Jindal Stainless Steel Coils Dealers
Jindal Gi Coils Dealers	Jindal Cr Sheet Dealers	Jindal Colour Coated Coils Dealers
Jindal Ppgi Coils Dealers	Jindal Color Sheet Dealers	Jindal Chequered Plate Dealers
Jindal Cr Coil Dealers	Jindal Crca Sheet Dealers	Jindal Corrugated Sheet Dealers
Jindal Gp Coil Dealers	Jindal G I Sheet Dealers	Jindal Coated Sheet Dealers
Jindal Hr Coil Dealers	Jindal Hr Sheet Dealers	Jindal Hard Plates Dealers
Jindal Ms Coil Dealers	Jindal Jsw Sheet Dealers	Jindal Ss 304 Plate Dealers
Jindal Ss Coil Dealers	Jindal Steel Sheet Dealers	Jindal Ss 304 Sheet Dealers
Jindal Ss Plate Dealers	Jindal Ss Sheet Dealers	Jindal Plates Dealers

Jindal plate Properties

 Jindal Plate Chemical Composition

Jindal Designation/code	%C (min~max)	%Mn (min~max)	%P (min~max)	%S (min~max)	%Si (min~max)	%Cr (mim~max)	%Ni (min~max)	%Mo (min~max)	N PPM (max)	%Others
Austenitic Cr-Mn*
J-201	0.150	5.5-7.5	0.060	0.030	1.000	16.00-18.00	3.50-5.50	–	2500	–
J-201L	0.030	5.5-7.5	0.045	0.030	0.750	16.00 -18.00	3.50-5.50	–	2500
J-201LN	0.030	6.4-7.5	0.045	0.015	0.750	16.00-17.50	4.00-5.00	–	1000-2500	Cu = 1.0 Max.
J-202	0.150	7.5-10.0	0.060	0.030	1.000	17.00-19.00	4.00-6.00	–	2500	–
J-204 Cu	0.100	6.5-9.0	0.060	0.010	0.750	16.00-17.50	1.50-3.50		1000-2000	Cu – 2.0-4.0
JSL AUS	0.080	6.0-8.0	0.070	0.010	0.750	16.00-18.00	4.00-6.00	–	1000	Cu – 1.5-2.0
JSL T	0.100	9.0-10.0	0.100	0.010	0.750	14.5-16.5	0.25-0.35		2000
J4	0.100	8.50-10.0	0.080	0.010	0.750	15.00-16.00	1.00-2.00		2000	Cu = 1.5-2.0
JSLU(DD)	0.15(max)	9.7 to 10.7	0.10(max)	0.03(max)	0.75(max)	15.1 to 16.0	0.45 to 0.60		2000	Cu = 1.90 to 2.20
JSL U(SD)	0.15(max)	9.7 to 10.30	0.10(max)	0.03(max)	0.75(max)	13.25 to 14.25	0.40 to 0.50		1000 to 2000	Cu = 1.25 to 1.75

 

Austenitic Cr-Ni*
J-301	0.150	2.000	0.045	0.030	1.000	16.00-18.00	6.00-8.00	–	1000
J-301L	0.030	2.000	0.045	0.030	1.000	16.00-18.00	6.00-8.00	–	2000
J-301LN	0.030	2.000	0.045	0.030	1.000	16.00-18.00	6.00-8.00		700-2000	–
J-304	0.070	2.000	0.045	0.030	0.750	17.50-19.50	8.00-10.50		1000
J-304M	0.04-0.10	2.000	0.045	0.030	0.750	18.00-20.00	8.00-10.50	–
J-304L	0.030	2.000	0.045	0.030	0.750	17.50-19.50	8.00-12.00		1000	–
J-304LN	0.030	2.000	0.045	0.030	0.750	18.00-20.00	8.00-12.00		1000-1600
J-309	0.200	2.000	0.045	0.030	0.750	22.00-24.00	12.00-15.00	–	–
J-309S	0.080	2.000	0.045	0.030	0.750	22.00-24.00	12.00-15.00
J-310	0.250	2.000	0.045	0.030	1.500	24.00-26.00	19.00-22.00
J-310S	0.080	2.000	0.045	0.030	1.500	24.00-26.00	19.00-22.00		–
J-316	0.080	2.000	0.045	0.030	0.750	16.00-18.00	10.00-14.00	2.00-3.00	1000
J-316L	0.030	2.000	0.045	0.030	0.750	16.00-18.00	10.00-14.00	2.00-3.00	1000
J-316LN	0.030	2.000	0.045	0.030	0.750	16.00-18.00	10.00-14.00	2.00-3.00	1000-1600
J-316Ti	0.080	2.000	0.045	0.030	0.750	16.00-18.00	10.00-14.00	2.00-3.00	1000	Ti-5X(C+N) Min., 0.70 Max.
J-317	0.080	2.000	0.045	0.030	0.750	18.00-20.00	11.00-15.00	3.00-4.00	1000	–
J-317L	0.030	2.000	0.045	0.030	0.750	18.00-20.00	11.00-15.00	3.00-4.00	1000	–
J-317LN	0.030	2.000	0.045	0.030	0.750	18.00-20.00	11.00-15.00	3.00-4.00	1000-2200
J-31727	0.030	1.000	0.030	0.030	1.000	17.50-19.00	14.50-16.50	3.80-4.50	1500-2100	Cu- 2.8-4.0
J-321	0.080	2.000	0.045	0.030	0.750	17.00-19.00	9.00-12.00	–	1000	Ti=5X(C+N) Min., 0.70 Max.
J-347	0.080	2.000	0.045	0.030	0.750	17.00-19.00	9.00-13.00	–		Nb- 10XC Min., 1.00 Max.

Martensitic
J-410	0.08-0.15	1.00	0.04	0.03	1.00	11.50-13.50	0.75 max	–	–	–
J-415	0.05	0.50-1.00	0.030	0.030	0.600	11.50-14.00	3.50-5.50	0.50-1.00	–	–
J-420	0.15 min	1.00	0.040	0.030	1.000	12.00-14.00	0.75 max	0.50 max	–	–
J-431	0.200	1.00	0.040	0.030	1.000	15.00-17.00	1.25-2.50	–	–	–
JBS	0.60-0.70	1.00	0.030	0.015	0.750	12.50-13.50	–	–	–

 

Ferritic
J-405	0.080	1.000	0.040	0.030	1.000	11.50-14.50	0.6	–	–	AI – 0.10-0.30
J-409	0.030	1.000	0.040	0.020	1.000	10.50-11.70	0.50 max			Ti -6X (C+N) Min., 0.5 Max.
J-409L	0.030	1.000	0.040	0.030	1.000	10.50-11.70	0.50 max	–	300	Ti =6X (C+N) Min., 0.75 Max.
J-410S	0.080	1.000	0.040	0.030	1.000	11.50-13.50	0.60 max		–
J-430	0.120	1.000	0.040	0.030	1.00	16.00-18.00	0.75 max	–
J-43OTi	0.030	1.000	0.040	0.030	1.00	16.00-19.00	–	–		Ti – 0.10-1.00
J-436	0.120	1.000	0.040	0.030	1.00	16.00-18.00		0.75-1.25		Nb= 5XC Min., 0.70 Max.
J-436L	0.025	1.000	0.040	0.030	1.00	16.00-19.00	–	0.75-1.25	250	% Nb or & Ti or °/0 combination= 8X (C+N) Min., 0.80 Max.
J-439	0.030	1.000	0.040	0.030	1.00	17.00-19.00	0.50 max	–	300	Ti-0.20+4X (C+N) Min.,1.10 Max. AJ= 0.15 Max.
J-441	0.030	1.000	0.040	0.015	1.00	17.50-18.50		–		Nb= 3X% C+0.3 Min.I % Max., TI = 0.1-0.6%

 

Ferritic + Martensitic
J-409M	0.030	0.8-1.5	0.030	0.030	1.000	10.80-12.50	1.50 max	–	300	Ti = 0.75 Max.

 

Duplex (Austenitic+Ferritic)
J-2205	0.030	2.000	0.030	0.020	1.000	22.00-23.00	4.50-6.50	3.0-3.50	1400-2000	–
J-2304	0.030	2.500	0.040	0.030	1.000	21.50-24.50	3.00-5.50	0.05-0.60	500-2000	Cu 0.05 Min.-0.60 Max.
J-31803	0.030	2.000	0.030	0.020	1.000	21.00-23.00	4.50-6.50	2.50-3.50	800-2000	–

 

Jindal plate Mechanical Properties

Jindal Designation/code	Tensile Strength (MPA)min.	%Yield Strength(MPA)min.	%Elongation(min.)	Hardness (HRB)max.
J-201	655	310	40	100
J-202	620	310	40	100
J-204 Cu	620	310	40	100
JSL AUS(J1)	550	206	40	96
JSL T	650	325	40	100
J4	650	325	40	100
JSL U	650	325	40	100
JSLU(DD)	650	325	40	100
JSLU UT	650	325	40	100
JSL U(SD)	650	325	40	100

Austenitic Cr-Mn*
J-301	615	205	40	96
J-301L	550	220	45	100
J-304	515	205	40	92
J-304M	515	205	40	92
J-304L	485	170	40	92
J-304LN	515	205	40	92
J-309	515	205	40	95
J-309S	515	205	40	95
J-310	515	205	40	95
J-310S	515	205	40	95
J-316	515	205	40	95
J-316L	485	170	40	95
J-316LN	515	205	40	95
J-316Ti	515	205	40	95
J-317	515	205	35	95
J-317L	515	205	40	95
J-317LN	550	240	40	95
J-31727
J-321	515	205	40	95
J-347	515	205	40	95

 

Martensitic
J-410	450	205	20	96
J-415	795	620	15	32 (HRC)
J-420	690	*	15	96

 

Martensitic
J-405	415	170	20	86
J-409	380	170	20	88
J-409L	380	170	20	88
J-410S	415	205	22	89
J-430	450	205	22	89
J-43OTi	360	175	22	90
J-436	360	175	22	90
J-436L	360	175	22	90
J-439	415	205	22	89
J-409M	415	205	22	89
J-2205	655	450	25	31 (HRC)
J-2304	600	450	25	32 (HRC)

 

Jindal Steel Round Bars Mill at Patratu produces following grades:-

Round Bar Diameter (mm):	20, 20.64, 21, 22, 23, 23.5, 24, 25, 27.5, 28, 30, 30.5, 32, 34, 36, 40, 45, 56, 56.5, 63
Carbon Steel
Plain Carbon Steel:	15C8, 35C8, 45C8, 55C8, C30, C35, C38, C40, C45CR, C48, C50, C55, C65, CK35, CK45, En2a, En3, En32B, En42, En43, En43AM, En5, En8, En8DCR, En9, JDMA1045, S20C, S25C, S35C, S38C, S40C, S43C, S45C, S48C, S50C, S53C, S58C, SAE1006, SAE1008, SAE1010, SAE1015, SAE1016, SAE1018, SAE1019, SAE1020, SAE1025, SAE1030, SAE1035, SAE1037, SAE1038, SAE1040, SAE1041, SAE1045, SAE1047, SAE1050, SAE1052, SAE1055.
Carbon Manganese Steel :	En15A, En15B ,SAE1524, SAE1541, 45M5, St52-3
Case Hardening Steel
Chrome Steel:	15Cr3, 17Cr3
Chrome Manganese Steel:	16MnCr5, 16MnCrS5, 20MnCr5
SCM Category Steel /Chrome- Moly Steel:	SCM415H, SCM418H, SCM420H
Nickel Chrome / Nickel Chrome Moly Steel:	SAE8620H, SAE8622, SAE8625, SAE8822, En351,En352, En353
Through Hardening Steel
Chrome Steel:	40Cr4, 40Cr4B, 40Cr4C, 41Cr4,41Cr4, En18, En18C, En18D
Chrome Moly Steel:	SAE4140
Ball Bearing Steel:	En31, SAE52100
Free/ Semi Free Cutting Steel:	En15AM, En18DM, En1A, En8DM, En8M
Spring Steel:	En45, En45A, 55SI7, 60SI7, 37MnSI5, SUP11A, SUP9G, 50CrV4, En47, 38XC, 52Cr4Mo2V, 59CrV4,  SAE4161H, SUP12,51CrV4

Jindal Steel Sheets Dealer, 304/304L Stainless Steel Sheets Price, 2B Finish Jindal Steel Sheets Suppliers, Price List of SS Steel Sheets Manufacturer, Jindal SS NO4 FINISH Sheets Supplier, Jindal Steel Strips Sheets Exporter